*Free Ground Shipping on orders $49 or more!
Orders less than $49, we charge a flat fee of $6.95 to the Continental US only. All other locations outside of the Continental US will receive discounted rates.
15 Degree 1-3/4-in Coil Roofing Nailer
- Uses 15 degree 3/4 to 1-3/4, 0.120
- Compact body design is 5% lighter for improved balance control Compared to previous model
- Selectable trigger for easy change between sequential contact mode
- Better balance with in-line hard coat anodized magazine.
- Bypass nail pusher for quick reloading.
- For asphalt, fiberglass shingles, roofing felt, tar paper, siding, cement board and insulation boards.
What's in The Box
- Basic tool
- 3/8 inch x 1/4 inch NPT plug
- Owner's Manual
- 30 Day Satisfaction Guaranteed
|Model RN175B||Brand Porter-Cable|
|Air Inlet Size (in) 1/4 in.||Angle (Degrees) 15 Degrees|
|Capacity 120 Nails||Fastener length (in.) 3/4 to 1 3/4, 0.12 in.|
|Fastener Type Coil Nails||Inlet Connection NPT|
|Maximum fastener size (in.) 1 3/4 in.||Maximum Pressure (psi) 120 psi|
|Minimum fastener size (in.) 3/4 in.|