These indoor surface mount transfer switches are designed for fast installation in residential and commercial applications. The 18-inch flexible conduit whip attaches easily to the load center and all wires are clearly marked. Simply select the circuits needed in an emergency and connect them to the Pro/Tran wire leads.
Pro/Tran transfer switches feature a rugged powder-coated steel cabinet with six combination 1/2-inch and 3/4-inch knockouts, resettable branch rated circuit breakers and non-defeatable (break-before-make) double-throw switches. Some models feature exclusive Reliance wattmeters with accuracy of ± 3% throughout the entire range.
All models with a power inlet on the front *with exception to model 30216BRK* also include a cover for the power inlet opening that facilitates hardwiring. All models without a power inlet on the front include a covered opening that permits the installation of a power inlet for cord connection directly to the transfer switch.
A wattmeter panel (WP7500) is available for all models without meters (except models 15114A and 30114A). The wattmeter panel includes an opening, with cover, for an optional power inlet.
- Model: 31406CRK
- Model Description: Pro/Tran Kit
- Max. Generator Watts: 7500
- Phase: Single
- Max. Single-Pole Circuits: 6
- Max. Double-Pole Circuits: 1
- Max. Combined Load @ 125 VAC: 60
- Max. Combined Load @ 250 VAC: 30
- 15 Amp Single Pole Circuit Breakers: 4
- 20 Amp Single Pole Circuit Breakers: 2
- Power Inlet, NEMA: Remote
- Cord Size (gauge): 10
- Conduit Size (inches): 3/4
- Wattmeters: Yes
- Dimensions H x W x D (inches): 7.5x7x4.5
- Cabinet Type, NEMA: Indoor
- Customer Reviews
Average! Customer Rating:(2 Reviews)
2 Item(s)per page
January 12th, 2014
Everything I needed including clear installation instructions
Comment:Great package for the novice
September 30th, 2011
The easiest theing to setup
Comment:This is so easy to setup even if your not an electrician an ordanary guy with the ordanary job can set this up so easy just take a few days read the instructions then over again then watch the DVD also included. After it sinks in to your head you can install your self with confidence! I only found the hardest part was hooking up the outside inlet box I mean that was easy installing the wire from the transfer box to the inlet box was the hardset thing and itall had instuctions so I just took my time and it all went together one thing is make sure the main breaker is off then go to town, Russ
2 Item(s)per page