- Voltage: 20V MAX*
- Nominal Voltage: 18V
- Drive Size: 1/4" Hex
- Anvil Type: Quick Release
- No Load Speed: 0 - 2,800rpm
- Impacts/Min: 0 - 3,200ipm
- Max Torque (in-lbs): 1,500in-lbs
- Max Torque (ft-lbs): 125ft-lbs
- Tool Length: 5.55"
- Tool Weight: 2.9lbs
- Shipping Weight: 7.3lbs
- DCF886 1/4" Impact Driver
- (2) DCB203: 20V MAX* Compact Li-Ion Batteries (2.0 Ah)
- Fast Charger
- Belt Hook
ALL NEW BRUSHLESS MOTOR DESIGN
The DCF895L2 is the first impact driver using DeWALT's all new brushless technology and works far more efficiently compared to brushed motors and provides significantly more Runtime in a smaller, cooler running cordless power tool. Conventional brushed motors create friction which generates heat and slows the motor down. The new brushless motor design eliminates friction allowing the tool to run longer between charges. In Addition, a brushless motor controls energy transfer efficiently within the tool. 20V MAX* XR brushless motor power tools give you more runtime. Get more done.
electronic transfer within the tool. This allows the tool to run longer between charges.
Red indicates friction caused by brushes on conventional motors. This slows the motor down and generates heat.
ALL NEW XR BATTERY
Professionals need a battery for their power tools that can work as long as they do on the job site! The new XR™ Li-Ion batteries with fuel gauge offer best in class runtime and improved cold weather performance, and are fully compatible with all 20V MAX* tools.
DEWALT's Premium XR™ Lithium Ion batteries pack maximum runtime in a lightweight design. Touting a 3-LED Fuel Gauge System, the batteries allow immediate feedback on the state of charge. Furthermore, there is no memory effect and virtually no self-discharge, resulting in less downtime. Overall, XR™ Li-Ion batteries with fuel gauge provide 33% more capacity over the standard packs.
FUEL GAUGE BATTERY PACKS
The DEWALT BRUSHLESS Impact Driver will feature Fuel Gauge Battery Packs. The batteries have three green LED lights that indicate charge level. A recessed push button design allows for durability and ease of use. By pushing this button, you will be able to check the amount of charge left in the battery before and after an application. 3 lights indicate a 100%-51% charge, two lights indicate a 50% to 26% charge, and one light indicates the pack is approximately 25% charged or less. These fuel gauge packs are fully interchangeable with existing 20V MAX* tools.
PUSH BUTTON CHUCK
The new DEWALT BRUSHLESS Impact Drivers feature 3-Speed selections for enhanced application control. The Electro-Mechanical speed selector is easily seen at all times and can be used with little effort. The selector allows for the ability to see what speed the tool is in without turning it on.
LED light with 20 second trigger
LED light with 20 second trigger release delay provides increased visibility in dark or confined spaces, LED placement on tool foot eliminates chuck shadows