Factory Authorized Outlet is an Authorized Reseller of DEWALT Industrial Tool Co.

Quick Cart

DeWALT 20V MAX Li-Ion Brushless 3-Speed 1/4'' Impact Driver (3.0Ah)


Item Number: DCF895L2

Retail Price: $369.00

Our Price: $317.99

Out of stock

Sorry this item has been Discontinued recently and no longer available.

• Motor: Brushless
• Speeds: 3
• RPM: 0-2850 / 0-1900 / 0-950
• Speed Selector:Electro-
  Mechanical Slide
• Max-Torque: 1500/900/500 (in-lbs)
• Length: 5.25"
• Weight: 3.6 lbs
• Chuck: (1/4") Push Button
• Accept 1" Bits: Yes
• Battery: (2) 3.0 AH
• Battery Fuel Gauge: Yes
• # OF LEDs: 3 (Around Chuck)
• LED Delay: 20 Sec. After Trigger Release
• Belt Hook: Yes (Metal)
• Accessory Storage: Yes
• Rubber Bumpers: Yes
• Multi-Voltage Charger: Yes
  (20V/12V MAX*)
• Nominal Voltage: 18V


One (1) DCF895 1/4" Impact Driver
Two (2) 20V MAX Lithium Ion 3.0Ah Battery Packs
One (1) 30 Minute Fast Charger
One (1) Belt Hook and Accessory Storage
One (1) Kit Box

The DCF895L2 is the first impact driver using DeWALT's all new brushless technology and works far more efficiently compared to brushed motors and provides significantly more Runtime in a smaller, cooler running cordless power tool. Conventional brushed motors create friction which generates heat and slows the motor down. The new brushless motor design eliminates friction allowing the tool to run longer between charges.

Green on the left indicates electronic transfer within the tool. This allows the tool to run longer between charges. Red on the right indicates friction caused by brushes on conventional motors. This slows the motor down and generates heat.

The new DEWALT BRUSHLESS Impact Drivers feature 3-Speed selections for enhanced application control. The Electro-Mechanical speed selector is easily seen at all times and can be used with little effort. The selector allows for the ability to see what speed the tool is in without turning it on.

The innovative push button chuck makes swapping out traditional accessories with a 1/4" hex as simple as pressing a button. To release the accessory, just press the small ergonomically placed button above the trigger while pulling the accessory out of the chuck. The push button chuck also accepts 1" bit tips to reduce the length of the driver front-to-back, making getting into tight spaces a snap.

The DEWALT BRUSHLESS Impact Driver will feature Fuel Gauge Battery Packs. The batteries have three green LED lights that indicate charge level. A recessed push button design allows for durability and ease of use. By pushing this button, you will be able to check the amount of charge left in the battery before and after an application. 3 lights indicate a 100%-51% charge, two lights indicate a 50% to 26% charge, and one light indicates the pack is approximately 25% charged or less. These fuel gauge packs are fully interchangeable with existing 20V MAX* tools.

Customer Reviews

Average! Customer Rating:

(4 Reviews)

4 Item(s)

per page
October 31st, 2012

Great product

Bought this impact to compare to standard 20v, so far it is worth the extra money. Batteries are not over heating. I am installing a large boat dock 10,000 3 stainless screws I am about half way complete. I have never even thought about using my other 20 v impact. The new battery packs are awesome, with the built in meter. I would highly recommend this product, worth every penny........
October 6th, 2012

Great impact!

Ive always held DeWalt to a higher standard and this impact is excellent. I would buy it again. Got a good deal too
DeWalt Fan!
August 15th, 2012

Great impact driver!

Works great and the 20 volt battery lasts a very very long time! A little pricey, but worth it.
Home owner building a deck
July 2nd, 2012

Tough and Efficient

Ive been a loyal Dewalt customer for 10 years, use the hell out of them and never had a failure. The Li-Ion brushless is no exception, I dont have much need for the 3 speeds but the quick-change chuck and new LED lights are invaluable. Torque and battery life are much improved over my old 18V NiCad as well. Only complaint is the safety/forward-reverse selector. With my toolbelt I find it switches to drive while I walk, and sometimes hits the trigger giving me my own theme music. By no means a deal breaker, this is a solid driver and I highly recommend it.

    4 Item(s)

    per page
    • Item Number: DCF895L2
    • Retail Price: $369.00

      Our Price: $317.99
      • Out of stock

    Visit our other outlets: Factory Authorized Outlet DeWALT Factory Authorized Outlet Porter-Cable Factory Authorized Outlet Makita Factory Authorized Outlet Ingersoll-Rand Factory Authorized Outlet Kreg Factory Authorized Outlet Bostitch